« | »

How Register a JAMB CBT Centre & Requirements 2019/2020 – NGScholars


JAMB CBT center registration requirements for 2019/2020 UTME. If you want to start and register a JAMB CBT registration center, here are the steps to follow and the requirements.

You have to meet these requirement in order to get approval from the Joint Admissions and Matriculation Board for your Computer Based Test Centre.

If you also have used your computer center in the past, you have to meet these guidelines. Below are the instructions and requirements.

Register a JAMB CBT Centre

Requirements for Starting / Registering a JAMB CBT Centre

Existing and intending CBT Centres should follow these strict guidelines from JAMB.

JAMB CBT Center cubicle size

Picture of a typical CBT Centre prototype

There are more information on the JAMB CBT center requirements. These can be found in the following PDF file. You can scroll through to read and you can also click the download link below it to save to your device.


The conduct of JAMB exam yearly requires tighter security. CCTV cameras will be installed to increase center security and prevention of malpractices during the conduct of the exam.

JAMB is desirous of implementing a CCTV network to perform the following tasks

  1. Live recording of activities in and around the center
  2. Remote live viewing on Digital Video Recorder (DVR)
  3. Live remote viewing of activities recorded (playback) on the Digital Video Recorder (DVR) of the center
  4. Ability to store recordings locally in each location for more than 1 month

Through the VPN network, JAMB will be able to access any center of choice for live remote viewing (preferably through browser), video or picture playback and download.

Technology Context

There are 2 major types of DVR/Cameras in the market.

  1. DVR with IP Cameras and
  2. DVR with analog cameras

Due to the higher cost of IP CCTV cameras, the DVR can be implemented with analog cameras. What is majorly required is the Network capability of the DVR to enable remote access through RJ45 port. (Wireless DVRs are not advised).

System Requirements for each center

Each center is expected to acquire the following specification of CCTV devices

1. Digital Video Recorder

  1. Playback through local software
  2. Remote Playback through Wired Network
  3. Standard search and navigation controls
  4. Playback with DVR App or standard browser access
  5. 264 minimum video compression technology.
  6. DVR/HVR/NVR 3 in 1 functionality required
  7. P2P Remote live viewing on Smartphone, tablet or PC via easy to use App or browser
  8. Smart search function with easy playback
  9. Minimum 8 Channel 720P High resolution day/night camera capable
  10. Support motion detection
  11. Support email alerts
  12. Pre-installed minimum of 1 TB SATA Hard drive or higher
  13. Flexible display port with VGA and HDMI output
  14. USB Mouse for local access
  15. IR Remote control
  16. Password functionality for DVR Access
  17. RJ45 Network port required for
  18. Capability for Live IP configuration
  19. Image or video export to USB media device e.g. USB Drive.
  20. Active noise filtering and voice recording

2. Camera Specification

  1. Weather proof Indoor and Outdoor cameras
  2. True Daylight and Night monitoring capability with minimum 66 Ft IR Range (IP66)
  3. IR Night vision LED cameras
  4. Minimum video standards: PAL (50f/s) and NTSC (60 f/s)
  5. Separate power adapters for cameras
  6. High resolution CMOS sensor
  7. Minimum 1500 TVL
  8. IP Cameras at a marginally higher price acceptable.

3. User manual (DVR and Camera)

4. Power specification

  1. 12 Volt DVR with minimum 3000mA adapter
  2. 12 Volt Cameras with minimum 2000mA adapter
  3. Maximum of 4 Cameras per 2000mA power adapter
  4. Maximum of 8 Cameras per 3000mA power adapter

5. Camera should have voice recording capabilities.

CCTV Installation

  1. Each CCTV system will require the DVR be installed in the Server room or any secure/restricted access room.
  2. Maximum length of wiring for each camera must not exceed 150Ft for video power camera cables (all-in-one pre-made length)
  3. High quality BNC Female camera adapter
  4. For internal cameras, dome or sectional cameras can be used.
  5. For external cameras, bullet /outdoor cameras will be used.
  6. Independent backup power to be provided for CCTV system
  7. Camera installation must be on ceiling at all times with no visible cabling.
  8. All cameras must be out of physical reach of all staff and candidates.
  9. Power distribution boxes are required for powering the CCTV cameras. Direct connection to power supply adaptor not advised.

Coverage Areas

Each Camera system must cover the following areas

  1. Entry door (from the inside)
  2. Exit door (from the inside)
  3. Cross-sectional coverage for examination rooms
  4. External building (including front doors)
  5. If in proximity, Biometric verification area.
  6. Candidate’s waiting area/lobby
  7. Server room

Support and Maintenance

Each CCTV installation must be supported/performed by a trained CCTV engineer All video loss on any camera must be reported immediately to the installer

How To Register a JAMB Computer Based Test (CBT) Centre

Persons who to apply for CBT center registration and approval should;

  1. Go to JAMB CBT Center registration portal at http://jamb.gov.ng/CBTRegistration/
  2. Fill the form on the page in order to register (Note that the fields with  * are mandatory).
  3. Click on Register button when you are done and wait for JAMB to get back to you.



Posted by on November 16, 2018.

Categories: School news

0 Responses

Leave a Reply

« | »

Recent Posts